Ceramic Cups Coating Processing Instructions

Cups sprayed layer to have a certain method, spray coating or uneven, will affect the quality of the coating of the cup.
A, dipping construction (also spray) ---- for small processing
1, pre-processing: the treated surface thoroughly clean; wipe with a dry cloth, do not have water; dried and then put up the oven (150 degrees); after removing cold indeed.
2 cups cold indeed after immersion grassroots solution, fully painted tilt removed, if the cup is, you can not let the coating was immersed in the cup, soak cups may not be required in the cup, just to soak the outside.
3, place the cup on the soaked 5-10 minutes in a dust cabinet or closed room, so that process was dry. At the same time, open the oven and let the oven heated to 200 degrees. After.
4, the coated glass into a 200 degree oven and bake for 15-20 minutes.
Note: You must Stir well before use, after use sealed lid. This product is flammable dangerous goods, please stay away from fireworks in a cool dry place sealed.

B, spray --- suitable for mass processing using the tool:
1, the gun (the market reference price of 200 yuan -300 yuan)
2, the air pump (air compressor) (the market reference price of 1,000 yuan -2000 yuan)
3, ventilation equipment, such as: Axial fans (the market reference price of 500 yuan -600 yuan)
4, with a blast oven for industrial use. (The market reference price of 1000 yuan - to select different price based on different power production)
Operating procedures:
1, the surface of the product in the order horizontal, vertical, horizontal, vertical, uniform spray four times.
2, the plane at room temperature dust (such as lockers in) placed 5-10 minutes to allow the treated dry.
3, into the 200-degree oven and bake for about 20 minutes.
4, to let cool at room temperature.